Блог компании

TL;DR: Experiencing unexpected downtime with your fiber laser cutting machine? Most operational interruptions stem from common, easily resolvable faults. This guide breaks down how to diagnose capacitance drops in the cutting head and provides a complete cheat sheet for decoding servo motor error codes (such as Overvoltage 400, Overload 710, and Overspeed 510). Quick diagnosis is key to maximizing your production uptime.

Just like any high-precision industrial equipment, fiber laser cutters can occasionally trigger system alarms. The good news? The vast majority of these alerts are routine faults designed to protect the machine from severe damage, rather than catastrophic failures.

Whether you are operating an XT LASER machine or another standard fiber laser system, this definitive troubleshooting checklist will help you quickly identify the root cause and get your production back on track.

Part 1: Troubleshooting the Laser Cutting Head

The cutting head is the brain of the machine’s Z-axis. When it malfunctions, the machine will usually stop to prevent a crash.

A) Capacitance Value Drops to 0

• The Issue: The height controller cannot detect the distance between the nozzle and the metal sheet.
• Solution: Inspect the ceramic ring and copper nozzle. Ensure they are not heavily contaminated, damaged, or physically blocked by cutting slag. Clean the components and recalibrate.

B) “Z-Axis Touching Board” Alarm

• The Issue: The system falsely detects that the cutting head has crashed into the metal plate.
• Solution: Check the radio frequency (RF) coaxial cable connection. Ensure the cable is securely fastened and verify that the sensor clamp ring has not become loose.

C) Calibration Abnormality

• The Issue: The capacitance calibration process fails repeatedly.
• Solution: Check if the encoder cable is loose. Additionally, inspect the connection interfaces and pins for any signs of oxidation or rust, which can disrupt the signal.

Part 2: Decoding Servo Motor Error Codes

Servo motors drive the high-speed movement of the X, Y, and Z axes. When a servo unit triggers an alarm, it usually displays a specific error code. Here is how to diagnose and resolve the most common servo faults:

Pro Tip from XT LASER: At our XT Laser Jinan Testing Center, our maintenance logs show that over 80% of “Overload (710/720)” servo errors are caused by a lack of basic mechanical maintenance, such as cleaning and lubricating the guide rails. Maintaining pristine mechanical and optical conditions is the absolute secret to high-speed, uninterrupted production.

We engineer this philosophy of extreme reliability into every machine we build. In fact, our optimized systems are so stable and user-friendly that a complete beginner using our latest XT LASER handheld welding devices can flawlessly weld 2mm stainless steel up to в 6 раз быстрее than an experienced TIG master. Proper maintenance doesn’t just prevent alarms—it unlocks peak performance.

Need Further Technical Assistance?

If your error code is not listed above, or if the alarm persists after following these troubleshooting steps, do not force the machine to run. Our technical support team is available globally to assist you.

Contact Person: Charles Yin, XT LASER Supportline safely. needs.olutions can transform your production line at xtlaser.com и запросите бесплатное тестирование образцов уже сегодня.

Свяжитесь с нами для получения специального предложения.

TEL：+86 18753177006

Отправьте свои данные, и наш менеджер свяжется с вами в течение 24 часов.

*

*

*

*

*

Я согласен на сбор и обработку моих данных в соответствии с Политикой конфиденциальности.Политика конфиденциальности*

Submitting…

Submission successful!

Submission failed! Please try again later.

Incorrect email address!

Incorrect phone number!