Stay informed with the latest industry news, trends, and innovations in laser technology, manufacturing, and automation. Get insights from the leaders in the laser cutting industry.
Mainstream systems each have their strengths: Han's self-developed rate exceeds 95%; Bochu focuses on thick plate cutting; Wisdom achieves 5-axis precision of 0.1μm; Weihong supports multiple gantries. The core trend is AI empowering systems for a...
Ayrıntıları görüntüle
XT Laser: Independent corner parameter adjustment + 5-axis contour-following tilt + dual-ring beam + dynamic power matching — making complex contours cut as precisely as straight lines.
Ayrıntıları görüntüle
Piercing time varies by power — 6kW takes about 3–5 seconds, while 40kW+ takes only 0.1 seconds. This article covers step piercing, parameter optimization, and the 2026 dynamic frequency technology to help you balance efficiency and quality.
Ayrıntıları görüntüle
Turn leftover material into valuable resources — 40% efficiency increase, 15%-40% improvement in material utilization, 62% waste reduction, 50% labor savings, payback period of less than 1 year.
Ayrıntıları görüntüle
24/7 fully automated operation, from raw material to finished product in one seamless flow. Single-shift cutting length of 1,980 meters, efficiency more than doubled, labor costs reduced by 60%, yield rate of 99.8%. Designed specifically to addres...
Ayrıntıları görüntüle
For laser mirror cutting: carbon steel uses low-pressure oxygen with negative defocus; stainless steel uses high-pressure nitrogen (20-24 bar). For film-coated material, use a two-pass cutting method; place a backing plate to prevent backside burn...
Ayrıntıları görüntüle
The CNC control system is the "brain" of laser equipment. Bochu and Weihong offer cost-effective AI-driven control, while Siemens and Fanuc provide high-precision digital twin capabilities. Domestic systems now hold over 95% market share, with com...
Ayrıntıları görüntüle
Three challenges of complex shape cutting: corner fluctuations, bevel deviation, and heat buildup. Intelligent segmented control + 5-axis linkage + beam modulation achieve precision of ±0.02mm/m, roughness Ra≤6.3, bevel angle 0-45°, ready for weld...
Ayrıntıları görüntüle
Industrial-grade fiber lasers have a design life of 100,000 hours, approximately 10-12 years. The end of life is marked by power衰减 to 80% of the initial value, not sudden failure. Constant temperature and humidity, 30%-60% load operation, and re...
Ayrıntıları görüntüle
Cutting H-beams and I-beams requires a dedicated 5-axis linked laser cutting system. It supports multi-angle cutting of the web and flange, enabling ±45° bevel and locking groove processing. Web height: 300-1200mm, flange width: 200-600mm, length:...
Ayrıntıları görüntüle
English English 
日本語
한국어
العربية
Русский
Français
Español de México
Português do Brasil
Türkçe
Tiếng Việt
XT LASER
