How to improve the efficiency of the fiber laser marking machine?

In this passage, we will give some suggestions for improving the efficiency of the fiber laser marking machine.

At first,the primary factors affecting the fiber laser marking machine is divided into internal factors and processing of the two elements of the workpiece.

The main internal elements are laser frequency, laser spot form and beam divergence Angle, laser power, reasonable optical integration.

The first internal factors in the early model selection of time attention, should follow the laser engineer’s opinion to choose.

Another factor is the primary need for customers to pay attention to the needs of processing.

The primary marking density, marking format, marking depth and laser spot size.

Secondly, it is optical fiber laser marker marking density

In the case of the same format, equal spot and the same depth, the higher the marking density is, the slower the corresponding marking speed will be.

The original density directly increases the marking area.。

Thirdly, máy khắc laser sợi quang marking format

Because the deflection area of large format marking galvanometer increases, the marking speed of large format is slower than that of small format.

At last,Optical fiber laser marking machine marking depth

According to the requirements, if the marking depth needs deepen,we need adjust the parameters of the fiber laser engraving machine.

So as to increase the power, current and other factors of the fiber laser marking machine.

Therefore, the above factors will affect the marking speed  in these processes.