Solve the problem of laser cutting machine

Solve the problem of laser cutting machine.

When long-time use of laser cutting machine for sheet metal processing. And the machine will inevitably lead to a decrease in accuracy and an increase in error, resulting in a decrease in the pass rate of the cut product, which is not conducive to the production of the enterprise. How should the machine be adjusted in the event of an error? The following will be analyzed from the following points.

First the thickness of the cutting material exceeds the standard. Generally, the thickness of a sheet that can be cut by a metal laser cutting machine is less than 12 thicknesses.  And the thinner the sheet, the easier it is to cut and the better the quality.  If the plate is too thick, the laser cutting machine is more difficult to cut. And in the case of ensuring the cutting, the machining accuracy will be inaccurate. So the thickness factor of the plate is determined.

Secondly the laser output power is not up to standard. When the laser cutting machine is running and debugging, it is necessary to ensure that the laser output power reaches the standard. Generally, the higher the output power of the laser, the better the quality of the cutting on the same thickness of the plate.

Thirdly the roughness of the cut sheet. In general, the flatter the surface of the cut material, the better the quality of the cut.