Reduce the losses of fiber laser cutting machine

Reduce the losses of fiber laser cutting machine.

Before the laser cutting machine running,to push the beam back and forth to ensure that there is no abnormal sound when moving left and right.

When finish today work, we should clean the waste and debris.So that the machine’s motion system can be protected from foreign objects.

Clean the moving parts of the laser cutting machine to keep the machine in good working condition. The specific method is as follows.

1. Put a little oil on the screw.Including the laser tube holder and the screw on the first mirror.Which can easily disassemble during maintenance. Note: Do not apply lubricating oil to timing belts, tow chains, air pipes, motors, sensors and lenses, and wires.

2. Do not put any objects in the laser cutting machine equipment.That is to avoid unnecessary damage to the machine.

3. Use cotton cloth to clean the metal oil tanker, metal shaft, slider and linear guide on the laser cutting machine. And then add the lubricating oil, and carry out the reciprocating motion of the empty line to make the lubrication more fully.

Operational losses are different from natural operating losses,we can minimize the losses by good usage habits,which is simply “controllable”. Therefore, we must strengthen our professional quality and create more value for the enterprise.

If you want to know more about machine,contact us.

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863