Fiber laser cutting machines control speed important

Everyone may have such a misunderstanding that the speed of the fiber laser cutting machine should be as fast as possible. So that more work can complete and greater economic benefits can create. In fact, many problems will occur if the fiber laser cutting machine cuts too fast. And fiber laser cutting machine control speed important.

The cutting speed of the fiber laser cutting machine is too fast. Which will cause cutting failure, sparks spitting, diagonal stripes appear on the cutting surface. And melting stains generate in the lower part. quality. Therefore, we should control the cutting speed of fiber laser cutting machine. The following are some suggestions given by XT laser.

First, at least three fiber laser cutting machine lathes and turning centers can be used.

X, Z axis feed and rapid feed, fast and smooth. High precision and low backlash planetary gear reducer is used with precision ball screw to reduce the mechanical failure rate and improve the precision. Servo-controlled high-low file conversion device shortens the time and makes the transfer fast and stable.

Second, the optical fiber laser cutting machine digital grinder and EDM can use at least three.

The X, Y, and Z three-axis movements are smooth and smooth, making the parameter setting of the controller easier, allowing the finished product to obtain high precision, smooth arc contact, and reducing surface roughness.

Three, fiber laser cutting machine processing center and CNC milling machine can use at least four.

X and Y axis feed and fast feed can increase the smooth feed, reduce noise and reduce the cost of servo motor. The high torque makes the control easier. Although the load is different, it does not affect its feed smoothness.