Fiber Laser Cutting Machine Operating Procedures

We know ,for customers who are start a new business or buy new machine ,they will worry  how to operate the new machine ,is it simple for Novice?

Today ,let us help you to know how to operate fiber laser cutting machine .

1.You need to determine material processing , the sheet metal material need to fix flat on the processing machine , and then determine the stability of the material  in order to avoid occurrence of the chattering in the cutting process , leading to the cutting accuracy is insufficient.
2 Operations Console , enter the product cutting pattern and cutting parameters such as material thickness , then adjust the cutting head to the proper focus position , and then reflect on and adjust the nozzle center

3 Start-up regulator and chillers, set the chiller water temperature and pressure

More than four points , although very brief , but in the actual operation , but spend a lot of time to practice , to become familiar with the details of each operation .

In operation inevitably fiber laser cutting machine , there will be some failures and problems , but also give us the following summary of share

so①Boot without any reflection：

Power fuse is burnt out : replace the fuse .Power input is normal : check the power input and make it normal .

Whether the main power switch is damaged : Replace the main power switch.

so②No laser or laser output is weak：

Whether the light path Offset: carefully adjust the optical path.

if  the device focusing Focus Change: Re- adjust the focus.

Whether the laser tube is wrong : replace the laser tube .

powered on laser power supply : Check the laser power supply circuit to make it normal .

Laser power is wrong: Replace the laser power .

so ③Processing dimension margin of error or operation error：

The signal line is working : Replace the signal line .

Power supply is unstable or interfering signals : the installation of regulators or eliminate the interference signal .

correct set processing parameters ( eg layout, etc. ) : re- set the corresponding parameters .

Processing programming properly : Check the programmed machining program , modify it until normal

SoAny questions,welcome to contact us,we will provide Professional solutions  for you .

Sales manager :

Anne Zhang

Mob/whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com