How To Extend The Life of Fiber Laser Cutting Machine

The main components of the fiber laser cutting machine are circuit system, transmission system, cooling system, light source system and dust removal system.

Firstly, Cooling system maintenance

Replace water regularly. The frequency of replacement is usually one week. The water quality and water temperature of the circulating water directly affect the service life of the laser tube. It is recommended to use pure water or distilled water and control the water temperature below 35 °C.

Secondly, Dust removal system maintenance

After a long time of use, the fan will accumulate a lot of dust. It will affect the exhaust and deodorization effects, and will also generate noise. When the fan is found to have insufficient suction and poor smoke exhaust, first turn off the power, remove the dust from the inlet and outlet air ducts on the fan. then turn the fan upside down, stir the blades inside until they are clean, and then install the fan. Fan maintenance cycle: about one month.

Thirdly, The optical system maintenance

After the machine works for a period of time, the surface of the lens will with ash.  It will reduce the reflectivity of the reflecting lens and the transmittance of the lens, and ultimately affect the working power of the machine.At this time, use a cotton wool and ethanol to carefully wipe along the center of the lens to the edge. We can gently wiped lens to prevent damage to the surface coating. We must handled gently to prevent it from falling; be sure to keep the concave surface facing down when installing the focusing mirror.

In conclusion, Above are some basic machine maintenance measures, if you want to know more machine maintenance tips, please contact us.

Bonnie
Skype: xtlaser211@gmail.com

Whatsapp&phone:0086 18654543989
Wechat: 18654543989