Common Fault Of Fiber Laser Cutting Machine-Nancy
Common Fault Of Fiber Laser Cutting Machine-Nancy
Common fault of fiber laser cutting machine-Nancy
During the use of the laser cutting machine, there will be some basic faults, so telling everyone how to deal with it.
Firstly,start the machine running,but without any reflection.
1.Whether the power fuse is burnt out: replace the fuse.
2.Is the power input normal: Check the power input and make it normal.
3. Is the main power switch damage: Replace the main power switch.
Secondly,no laser output or laser is very weak.
1.Whether the road is offset.carefully adjust the light path.
2.Whether the reflective lens is contaminate or damage.So clean or replace the reflective lens.
3.Whether the focus of the laser cutting machine changes focus.readjust the focus.
4.Concentration of the focusing mirror.So Clean the focusing mirror.
5.Whether the cooling water quality or water temperature is normal. Replace the clean cooling water to make the temperature to normal.
6.Whether the cooling water circulates.So dredge the cooling waterway.
7.Whether the laser tube is damage or age.Replace the laser tube.
8.Whether the laser power is on.Check the laser power supply circuit to make it normal.
9.Whether the temperature of the whole machine is too high.
1. Shut down to lower the temperature. 2. Ventilate to strengthen the heat of the machine. 3. Adjust the ambient temperature.
Is the laser power supply damage? Replace the laser power supply.
Cause there are many factors,we can not control.So when the problem comes out,firstly we should do it to check.Then provide the solution.
Finally, if you want to know more details,contact us.
Email: xintian123@xtlaser.com
WhatsApp&WeChat&Phone: +86 17854271909.
Website: https://www.xtlaser.com
