How to choose the laser source

How to choose the laser source.

1 laser beam quality.

Firstly,Spot roundness
The roundness of the spot describes the uniformity of the energy distribution of the spot in different directions. The spot with high roundness has uniform energy distribution in all directions. When doing non-linear cutting, it can ensure the consistency of cutting surface smoothness and cutting speed in all directions, and ensure the quality of cutting products. .

2 laser output power stability.

Secondly,Output power stability over the full power range
The lower the stability value, the better the stability of the laser at different output powers, ensuring the consistency of the cut surface finish and cutting speed at different thickness cuts. It can improve the authenticity rate of the products to be cut and ensure the stability of the quality of the cut products.

3 core component quality control.

Thirdly,Important performance to reduce equipment failure rate

The core components determine the overall performance and quality of the laser. Outsourcing core components can make the overall performance and quality of the laser difficult to control, and the performance and quality of the laser cutter are uncontrollable.

4 laser electronic dehumidifier.

Fourthly,Important performance to reduce equipment failure rate.

Condensation occurs when the laser cooling system and the temperature of the cool device are below the dew point temperature of the surrounding humid air, causing corrosion of the device and causing malfunction.

5 laser cabinet protection level.

Important performance to reduce equipment failure rate
The laser cabinet protection level describes the waterproof and dust proof level of the cabinet.

The high IP level cabinet can effectively prevent external dust and water from entering the cabinet, keep the inside of the laser cabinet clean and dry. To avoid laser failure caused by dust and water entering the cabinet, so it can reduce customer laser maintenance. Cost and downtime costs.

6 Electro-optic conversion efficiency (WPE).

Important performance to reduce operating costs

Describe the ratio of the input power to the output power.

If the electro-optical conversion efficiency is high, the power consumption is low under a certain output power, the laser heat is low, the power consumption cost of the laser is lower, and reduce the power consumption cost of the water cooler for heat dissipation.

Finally,if you want to have a fiber laser cutting machine,so hope we can support the correct solution.

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863