How to improve fiber laser marking machine marking speed?

The main factors are laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping and auxiliary gas during processing. The internal factors mainly pay attention to when the previous models select. And should purchase according to the opinions of the laser engineers. How to improve fiber laser marking machine marking speed?

Another factor mainly needs to be paid attention to by customers when processing. Mainly for marking density, marking format, marking depth and laser spot size. So, how to improve fiber laser marking machine marking speed?

1. Marking density

In the case of the same format, the same spot, and the same depth, the higher the density of the marking. The slower the corresponding marking speed, because the density directly increases the marking area.

2. Marking the format

Since the deflection area of ​​the large-format marking galvanometer increase. And the marking speed of the large-format surface is slower than that of the small-format marking.

3. Marking depth

According to the demand, if the depth of the marking deepen. And the parameters of the fiber laser marking machine need to adjust to increase the power and current of the fiber laser marking machine. So the marking speed will be affected in these processes.

4. Laser spot size

The smaller the spot size, the smaller the marking volume. Therefore, the larger the spot size, the faster the marking speed.

Catherine

Skype: xtlaser188
QQ: 3251773229
Email: xintian106@xtlaser.com
Tel / Whatsapp / Wechat: 008615588821549
YOUTUBE: https://www.youtube.com/channel/UC9ZYHh4cTjAZgkWFXQDVwFA