Fiber laser cutting machine five tips

Proper use of fiber laser cutting machine is a great way to extend the life of laser cutting machine. Fiber laser cutting machine has a lot of skills when it is used. Let’s take a look at fiber laser cutting machine five tips.
1) Since the double focal length laser cutting head is a vulnerable part of the laser cutting machine. And it cannot work for a long time and will cause wear and damage of the laser cutting head.
2) Regularly check the straightness of the fiber laser cutting machine and the verticality of the machine. Then our company usually checks it for six months. If any abnormalities are found, please adjust and maintain it in time. If there are errors in the irregular inspection, the effect is not very good. And affecting the cutting effect, so this link must do.

3) Regularly clean the garbage and dust in the vacuum cleaner every week.

And set the dustproof device at the same time. Vacuum and vacuum the machine to remove dust and dirt from the machine once a week. All electrical cabinets should protect from dust.
4) The steel strip of the fiber laser cutting machine should keep in tension at all times, which can reduce the occurrence of safety accidents during the operation of the machine. If the phenomenon of loosening of the steel strip will lead to the tragedy of death. Then the steel belt looks Like a small thing, the problem is still a bit serious.
5) The guide rails of the fiber laser cutting machine should be cleaned regularly to eliminate dust and other debris. And the rack of the equipment should be wiped frequently, add lubricating oil. And often add lubricant to make the machine move better. Then more precise cutting to ensure the work can carry out quickly.
The above briefly describes the five major techniques of fiber laser cutting machine. This is a little summary of our company in the experiment. Of course, in your different work situations, the skills and actual work will be different, you can The situation is to be properly borrowed.