What kind of benefits will the cutting machine process bring to the user?

What kind of benefits will the cutting machine process bring to the user?

After the fiber laser cutting machine starts the automatic edge finding function, the cutting head can start from a certain point, and then automatically measure several points on the two vertical sides of the sheet, and automatically calculate the inclination angle of the sheet and the board accordingly. The origin of the material to complete the cutting task.

The continuous development of shipbuilding technology has led to major changes in shipbuilding materials and ship design. So, what are the specific applications of lasers in ships?

When the laser cutting machine of the fiber laser cutting machine cuts ordinary carbon steel, the thicker the material, the lower the pressure of the cutting gas. When cutting stainless steel, the cutting gas pressure increases relatively with the thickness of the material. In short, the choice of cutting gas and pressure during laser cutting must be adjust according to the actual situation during cutting. In specific applications, different cutting parameters should be select according to the specific conditions.
Laser cutting equipment laser has four main characteristics: laser high brightness, high directivity, high monochromaticity and high coherence.

First, vaporization cutting

Under the heating of the laser cutting machine with high power and high density laser beam. The surface temperature of the material is accelerate and the material melting proble. As a result, some of the material in direct contact disappears, and some materials are blown away by the auxiliary gas.

Finally, melt cutting

When the power density of the laser beam incident by the laser cutter reaches a certain value. The material at the point of irradiation of the beam begins to evaporate, forming a hole. Once such a small hole is form, it will absorb the incident beam energy as a black body. The airflow coaxial with the beam carries away the molten material around the aperture. As the workpiece moves, the small holes are simultaneously traverse in the cutting direction to form a slit. The laser beam of the laser cutting machine continues to illuminate along the slit.

If the weight is too heavy, there will be no good characteristics. However, the thin steel plate cannot be anneal during welding. So the beam will be deform after a period of use. It is recommended to examine the accuracy of this type of equipment using a high-speed cutting plate for a period of time.