The  quality of fiber laser cutter machine is a matter of concern to the customer, and is also a skill training that the machine operator need to continuously improve. But the most important is that if you want to cut a satisfactory sample, you need to use the laser cutting machine for steel scientifically.

The following three points will show us how to judge the quality of cutting. And learn how to make a high quality metal  with fiber laser metal cutter:

• 1.Smooth cutting edge without brittle rupture and cutting pattern or with only little pattern.

  When the optical fiber laser  machine cuts, the  marks will  displayed after the laser beam deviates. So the formation of the pattern  eliminated by reducing the rate slightly at the end of the cutting process.

• 2.Cutting slit width. This factor  related to the thickness of the  plate and the size of nozzle.

In general, when the  plate is narrow, the nozzle should be small. Because the amount of jet required is relatively small. Similarly, if the plate is thick, it needs more jet, so the nozzle is            also large. The seam will also  widened accordingly. Therefore, to find the appropriate type of nozzle, can help customers cut out a good product.

• 3.With a good verticality, small head effected area.

It’s import factor of verticality, when the laser beam is far away from the focus, the laser beam will diverge. According to the focus position, the  becomes wider toward the top or                      bottom, and the more perpendicular the edge, the higher the  quality.

XTLASER provide high quality laser machine professional for metal cutting, welcome to contact us if you have any needs!

XTLAZER

Luis Li

Email:xintian124@xtlaser.com

Khatsapp:+86 18865659650

Facebook:lpf77777@outlook.com Luis Li

Skype:Luis Li, xintian0077@gmail.com

Kechat:wakawaka212

QQ:2900034185