How to enhance the marking speed of metal laser marking machine?

Firstly, the major factors are laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping with the processing of auxiliary gas, material. Internal factors mainly in the early models when the allocation of attention, should follow the advice of laser engineers to buy. Another factor mainly requires customers to pay attention to the processing. It is mainly for the marking density, format, depth and laser spot size in metal laser marking machine.

1. Marking  density

In the same format, the same spot, the same depth of the case, the higher the density of marking, the corresponding marking speed will be slower, the reason for the density directly increase the marking area in metal laser marking machine.

 

2. Marking the format

Because the large format marking galvanometer deflection area increased, so large format marking speed than the small format marking speed is slower.

3. Marking depth

According to the demand, if the depth of the marking to deepen the need for fiber laser marking machine parameters to adjust the fiber laser marking machine power, current and other factors, so in these processes will affect the marking speed.

4. Laser spot size

The smaller the spot, the smaller the marking volume, so the bigger the spot, the faster the marking

4. Setting the appropriate delay
Different fill types are affected by different delays. Reducing the delay associated with the fill type can improve the marking efficiency.

Firstly, Arch fill, shape fill. Mainly affected by the corner delay. You can reduce the opening delay, off the light delay, the end of the delay.
Secondly, Bidirectional filling, one-way filling. Mainly by the opening delay, light delay delay. It can reduce the corner delay, the end of the delay.
Note: thick graphics, fonts affected by the delay is small, can be appropriate to reduce the delay. Fine graphics, fonts affected by the delay, you can increase the delay.