Precautions for Laser Cutting Machine–Huda

Precautions for Laser Cutting Machine

Precautions for Laser Cutting Machine

1, Observe the general safety regulations for laser cutting machines. Start the laser in strict accordance with the laser startup procedure.

2, The user must be train, so that familiar with the equipment structure and performance, and master the relevant knowledge of the operating system.

3. Wear protective gear according to regulations, so you must wear appropriate protective glasses near the laser beam.

4. Do not process a material without knowing whether it can be irradiated or heated with a laser to avoid the potential danger of smoke and vapor.

5. When the laser cutter is running, the operator shall not leave the post or entrust the management without authorization.

If it is really necessary to leave, the laser cutter operator shall stop or cut off the power switch.

6. Keep fire extinguishers within easy reach; turn off lasers or shutters when not processing; do not place paper, cloth, or other flammable materials near unprotected laser beams.

7. When an abnormality is found during laser cutting, the machine should be shut down immediately, and the fault should be rectified or reported to the supervisor in time.

8. Keep the laser generator, frame and surrounding area clean, orderly, and free of oil pollution. Workpieces, plates, and waste materials should be stacked in accordance with regulations.

9. When using gas cylinders, avoid damaging the welding wires to avoid leakage accidents. The use and transportation of gas cylinders shall comply with the gas cylinder monitoring regulations.

Do not expose cylinders to direct sunlight or heat sources. When opening the bottle valve, the laser cutter operator must stand on the side of the bottle mouth.

 

    Obtenha uma cotação

    Precisa de ajuda?

    Preencha o formulário abaixo e o suporte estará disponível dentro de uma hora!