jewelry cutting parameters,fiber laser marking machine cutting machine-Jill
jewelry cutting parameters
Here we share some jewelry cutting parameters with u.
1.Cutting videos
Firstly,we share some cutting videos.
Metal:0.5mm brass with 110*110mm lens
Machine:50w Raycus
https://youtu.be/EGEe8KuJ8n8
2.cutting ability
Secondly,we introduce cutting ability.
And firstly,30w can cut maximum about 0.6-0.7mm gold /silver/brass.
And secondly,50w can cut maximum about 1.2mm gold /silver/brass.
3.cutting parameters
And then,u can set parameters.
speed:100 mm/s
power:95%
loop count:160 for 30w; 60-100 for 50w
4.wobble parameters
If the jewelry sheet is too thick,which is difficult to cut,u can use the wobble to improve the cutting
the wobble parameters:
Diameter:1mm
Distance:0.1 or 0.2mm
But this setting will improve the jewelry loss,the cutting width is wider,so do not always use this function.
5.Note
If u want to cut jewelry,u need to choose 110*110mm lens. or less.such as 50*50mm and 70*70mm.
It is the best lens for faster cutting speed.
We do not suggest using other bigger lens to cut.
More questions just let us know.
Jill from XT LASER
E: xintian101@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01
