Fiber laser metal cutting machine inspection treatment

For the fiber laser cutting machine, when we use it, sometimes will meet some questions. So today we will discuss fiber laser cutting machine alarm inspection treatment.

First, the laser cutting machine overtravel alarm and release

When the running distance of the laser cutting machine exceeds the set distance. Then all the motion axes of the laser cutting machine will set to the jog state by default. If the manual direction key kept by hand, when the machine leaves the limit position. Then you can connect to the sport at any time. However, when moving the workbench, be sure to note that the direction of movement of the workbench must far from the limit. The cutter software alarm can clear in the coordinate setting by three axes. Fiber laser cutting machine alarm inspection treatment.

Second, the failure of the laser cutting machine alarm

Over-travel alarm means that the laser cutting machine has reached a very extreme position during the working process.  Fiber laser cutting machine alarm inspection treatment. If there is an alarm, please follow these steps to check:
1. Is the laser cutting machine and computer grounded correctly?
2. At this point, the coordinate value at this moment has exceeded the value range limited by the laser cutting machine software.
3. Check if the size of the map you are designing exceeds the processing range.
4. Check if the connecting line between the motor shaft and the lead screw is loose. If it is loose, tighten the screw.

Now fiber laser cutting machine is really hot selling and more customers choose the machine in metal cutting industry. And XT LASER is the fiber laser machine factory more than 15 years in China. Therefore, all machines have CE, FDA, SGS, ISO certication. So for the machine quality, price and service, do not worry.

Wendy

Skype: XT Wendy Ning
Email: xintian112@xtlaser.com
Tel / Whatsapp / Wechat: 0086 13176671529