Fiber laser cutting machine summer maintenance
Fiber laser cutting machine summer maintenance
Summer fiber laser cutting machine needs frequent maintenance
Fiber laser cutting machine can not avoid routine maintenance, especially in the summer dry days, equipment is prone to problems, so the fiber laser cutting machine in the summer work must do a good job of heat dissipation and maintenance, otherwise, the service life of the machine will be greatly shortened, not only delay the progress of the work and will also increase the maintenance costs. Summer temperatures rise, the laser cutting machine cooling system working pressure increases, it is recommended that before the arrival of high temperature check the maintenance of the cooling machine in the internal snow pressure, the pressure of different manufacturers of equipment is not quite the same, it is recommended that before the maintenance of the equipment manufacturers to consult the specific parameters of the next to understand the fiber laser cutting machine summer maintenance maintenance in the end to take what measures.
Fiber laser cutting machine summer maintenance measures
Measure 1: change the water diligently
Before the machine must ensure that the laser tube is full of circulating water, circulating water quality and water temperature directly affect the service life of the laser tube. So we should regularly replace the circulating water and clean the water tank. Note: It is best to do it once a week.
Measure 2: timely cleaning of the lens
There will be some reflector and focusing mirror on the machine. The laser is reflected through these lenses, focused from the laser head to launch. The lens is easily stained with dust or other pollutants, resulting in laser loss or lens damage. So the lenses are cleaned every day.
Pay attention while cleaning the laser cutter lenses:
1. The lens should be gently wiped, do not damage the surface coating;.
2. The wiping process should be gently held and placed to prevent falling.
3. Please make sure to keep the concave side down when installing the focusing mirror.
Measure 3: Clean the scale
Summer due to higher temperatures, the cooling water deterioration rate will be accelerated, it is recommended that laser cutting machine users use distilled water or pure water, and regularly clean up the scale, so as not to cause the laser pipeline attached to the scale affects the laser power. Different types of laser cutting machine cleaning scale method is different, need to operate under the guidance of the manufacturer.
As the dust of the laser cutting machine is mainly metal powder, it is recommended to clean the dust in the control cabinet of the laser cutting machine and check the working condition of the cooling fan at regular intervals.
The climate characteristics of each season are very different, laser cutting machine belongs to the higher requirements for precision, and more expensive processing and equipment, for the climate characteristics of scientific and orderly maintenance can effectively avoid small problems in the laser cutting process, and improve the service life of the laser cutting machine. In addition to laser cutting machine maintenance in summer, we should also be regular routine maintenance of laser cutting machine.
