Why choose XTLASER fiber laser cutting machine

Why choose XTLASER fiber laser cutting machine

Firstly,Small holes on the side of machine bed

When the machine working for a long well,it’s very easy to stacking scrap iron,these small holes can help to drip the scarp iron,keep the machine bed clean.

Secondly,Guide rail of the manganese steel gantry

For XT manganese gantry, there is one guide rail on each of top and front side.When the machine working, this type is more stronger and stable than the normal type(which only the top have guide rail), see pics as below

Thirdly,Height controller

It can calibrate if the metal sheet flat or not, adjust it by control the cutting head up and down, sometimes, this controller is not appear in outside, just in the software.

Fourthly,Single nozzle and double nozzles
Often, cutting stainless steel use the single nozzle, carbon steel use the double nozzles, metal sheet more thickness, the nozzle bigger.
For example: 1-3mm stainless steel, can use 2.0/3.0 single nozzle, 1-5mm mild steel can use 1.5/2.0/3.0 double nozzle

Fifthly,water pipe

We are using to different colors for the water chiller’s pipe, orange pipe means water go inside; blue pipe means water go outside. Two different color can help you recognize easily if you need fix some parts by yourself.

Sixthly,proportional value

Using for adjusting air pressure, mainly controlling oxygen, small pressure when you punch the whole, atmospheric pressure for cutting work.
It can help you just change the gas in the software, no need to find the gas tank.

More details you want to know about the cutting machine,just contact us:

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863