Application of fiber laser cutting machine

Application of fiber laser cutting machine

Now various industries such as light industry and heavy industry widely use the Laser cutting machines.

At present, there are traditional cutting machines.

Such as plasma cutting machines, flame cutting machines and laser cutting machines.

In the metal cutting machine, there are currently traditional cutter cutting machines and laser cutting machines.

The individual laser cutting machines are mainly metal sheet metal processing, metal cutting.

And also metal cutting, casing, chassis cutting processing, sanitary ware, kitchen utensils, instrument exterior panels, elevator panels and other industries.

At present, laser cutting machines are divided into medium and small power and high power cutting machines.

The medium and small power cutting machines are individually below 1000W.

The price is absolutely cheap. And the thickness of the cutting metal does not exceed 10 thicknesses.

The high-power laser cutting machine is more than 1000W or even several kilowatts.

The cutting thickness is thick.

The price is relatively high, and the processing of large manufacturers such as auto parts is more suitable.

Carbon steel plate cutting:

The modern laser cutting system can cut the maximum thickness of carbon steel plate by 20mm and the slit of the thin plate can be narrowed to about 0.1mm.

The laser-cut low-carbon steel has a very small heat-affected zone and is flat and has a good verticality.

For high carbon steel, laser cutting trimming quality is better than low carbon steel,

but its heat affected zone is larger.

The XTLASER laser cutting machine has a maximum cutting depth of 250mm.

Stainless steel cutting: laser cutting makes it easier to cut stainless steel sheets.

XT laser’s low-power 500w laser cutting system cuts stainless steel up to 4mm.

Alloy steel plate cutting:

Most alloy steels can be cut by laser, and the quality of trimming is good.

However, tool steels and hot-mould steels with high tungsten content will have corrosion and slag during laser cutting.