Focus on the laser source in Winter

Focus on the laser source in Winter.

Firstly.Antifreeze selection

Add professional brand antifreeze to the water cooler, such as Clariant’s AntifrogenN antifreeze, which is in a ratio of 3:7 (3 for antifreeze,  7 for water). And can resist -20 ° C without freezing after adding antifreeze. If the temperature is lower than this range, please consult the water cooler supplier to confirm the proportion of antifreeze.

If the professional brand is not convenient to buy, you can purchase the large-capacity car antifreeze shell OAT-45°C, which can be directly in the laser water cooling system. The dilution ratio can refer to the following table. Please compare the actual temperature according to the place of use, due to the use environment and water cooling machine. The reason for the configuration, the actual use will affect the flow rate and flow rate of the coolant, causing the water cooler flow alarm or the laser heat dissipation problem. If the temperature is abnormal, please contact our company after-sales personnel.

Secondly.Antifreeze use precaution.

Any antifreeze cannot completely replace deionized water and cannot be used for a long time throughout the year. After the winter, use the deionized water or purity water to clean the pipeline. And deionized water or purified water should be used as a coolant.

Thirdly,At the same time, during the holidays such as the Spring Festival holiday or during the long power outage, please drain the water in the pipeline related to the laser and water cooler.

If is fine ,it is better for water chiller working

Finally,If your laser machine did not use for long time ,please drain the water chiller,cutting head,and laser source out ,do not leave water

Any questions about fiber laser cutting machine,contact us.

Email:xintian111@xtlaser.com

whatsapp:+8618253165863