How can we maintain a fiber laser cutting machine in the summer?

How can we maintain a fiber laser cutting machine in the summer?

At the moment, it is in the midsummer, high temperature everywhere, fiber laser cutting machine will inevitably appear to be hot during the process of use. This requires the user to pay attention to the maintenance and repair of the equipment, in order to extend its service life.

So, how can we maintain a fiber laser cutting machine in the summer?

First, since the dust of the fiber laser cutting machine is mainly powder.

It is recommend to regularly clean the dust in the electrical cabinet of the fiber laser cutting machine and check the working condition of the cooling fan to avoid unnecessary problems.

Second, in the dry weather, the deterioration rate of the cooling water will also be accelerated.

It is recommend that the user of the fiber laser cutting machine use regular water or pure water, and regularly clean the scale to avoid causing the scale of the laser and the pipe to affect the laser power.

Third, pay attention to the temperature of the cooling water should not be too different from the air temperature.

The Chinese laser recommends that the user of the fiber laser cutting machine set the water temperature to 30-32 degrees, and control the temperature difference between the cooling water temperature and the room temperature to be greater than 7 degrees.

Fourth, the summer temperature rises, the working pressure of the cooling system of the laser cutting machine increases.

It is recommend to maintain the pressure of the cooling machine before the high temperature comes. The pressure of the equipment of different manufacturers is also different. It is recommend to consult the specific parameters of the equipment manufacturer before maintenance.

Fifth, the laser tube must be filling with circulating water before the machine works.

The water quality and water temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to periodically replace the circulating water and clean the water tank. This is best to do once a week.

Sixth, there will be some mirrors and focusing mirrors on the machine.

The laser is reflected by these lenses, focused and emitted from the laser head.

Finally, the lens is easily stain with dust or other contaminants, causing laser loss or lens damage. So clean the lens every day.

Regular maintenance of the equipment can solve some problems during the use of the laser cutting machine.It can increase the service life of some parts and equipment performance, and secondly increase the working efficiency of the equipment, so in addition to the maintenance of the laser cutting machine in the summer.