If you face the problem of nozzle failure during the cutting process, how to deal with it? here sharing with you as follow:

Now fiber laser cutting machines rely on the advantages of “low energy consumption, no pollution, simple operation” become rapidly popular. However, due to some improper operation factors, the laser nozzle may be blocked or damaged. Thereby causing the cutting precision of the laser cutting head. And affecting the service life of the cutting machine. This article focuses on the main causes of laser nozzle failure. Follow me please.

First of all, we know that laser nozzles are generally divided into single and double layers. The nozzles range in diameter from 1.0 mm to 3.0 mm and with 5 taper holes. These features do not guarantee that the nozzle will dissipate heat and it is not easy to get slag. However, due to features in the nozzle itself and the performance of the cutting machine. It is easy for the nozzle to worn out.

1. The nozzle “chip”, the aperture becomes larger

Single-layer laser nozzles are easily deforme by flaws due to the soft material. And in the process of mechanical operation, the nozzle will directly contact the slag. Then if the melting point of the cut sheet is locat in the inner circumference of the aperture. The phenomenon of “chip accumulation” will easily occur. Resulting in the deviation of the direction of the laser beam and the weakening of the energy. Eventually leading to the cutting accuracy is reduce. Which affects the cutting quality. When the accumulate debris reaches a certain level. It will wash away by the high pressure airflow under high temperature conditions, resulting in a larger diameter.

2. The nozzle is deformed and the slag particles damage the inner lens

In the cutting process, there are two cases. When the laser cutting head is collid in the vertical direction. The mechanical sensing protection mechanism will stop the machine. Then the collision from the horizontal direction can naturally be thought of as a collision with the laser cutting head due to the lifting of the material cut. When the laser cutting head is stress. The sensor protection mechanism can stop the mechanical operation in time. But at the same time, for the laser head is stress, the laser head is tilt. The laser beam is deflect, and the nozzle directly contacts the material. Causing the nozzle to deform. Continue cutting. When the laser head is lightly stress. The sensing protection mechanism can not shut down the machine in time. Causing the nozzle to enter the slag, and the high pressure airflow will blow the slag into the laser head to cause loss.