Before marking the final payment, many buyer will worry about operation of this gold fiber laser marking machine. And we know it is the most important part for every customer to operate it. Today, we are going to share more tips here. So customer will have 100% confidence about the this gold fiber laser marking machine.

About software in gold fiber laser marking machine

We know it is important to every clients, who use marker firstly, so before delivering out, the software will be installed on the laptop, and the machine will be tested 16 hours at least. If these is no problems about the machine running. Then the parameters will be saved in the F disk. And send the COPY version to the USB disk. Except the parameters and software, the USB disks will save the Software User Manual, Machine User Manual, and Software operating videos. Which can make sure clients operate the machine easily, once received the machine. All our softwares support English language, and what’s more, you can also learn the Ezcad firstly, by the download the demo version as below:

https://drive.google.com/drive/folders/0B6_C4CGHz1f6X1IwRjZiYy13UDQ?usp=sharing

You can also download and install this into your laptop, and learn the software firstly.