The lifespan of fiber laser marking machine

How many years does a fiber laser marking machine take?Today we will introduce the lifespan of fiber laser marking machine.

I believe many people will ask this question.

Today to give you the calculation:Laser lifetime laboratory data is 100,000 hoursIf you work 24 hours a day, that’s 11 years.

If the laser attenuation is excluded and the mark cannot be marked on the workpiece, you can use it for six years based on the laser output of 40%.

Of course, this is the theoretical data.

According to the experience of XT laser, the optical fiber laser marking machine launched by our company has been used in the user site for five years.

And it is now running well.

The following summarizes a series of optical fiber marking machine maintenance specific methods.

1) when the fiber laser marking machine does not working, the marking machine and computer power should be cut off.

2) when the machine is not working, cover the field lens well to prevent dust from contaminating the optical lens.

3) the circuit of the machine is in a high-voltage state when it is working.

Non-professionals  not allowed to repair the machine at startup to avoid electric shock accidents.

4) the power need  cut off immediately in case of any fault.

5) if the device use for a long time, it will absorb the dust on the surface under the focusing mirror.

If it is light, the power of the laser will be reduced, affecting the marking effect.

The most serious cause of the optical lens heat absorption so hot that burst.

When marking effect feel  not good, should carefully check the focus lens surface is contaminated.

Any questions,pls feel free to contact us.

Ariel Liu

Email:xintian122@xtlaser.com