Laser welding head maintenance.

The principle of laser welding head is actually close to the laser cutting head. After using, it needs to pay attention to maintenance and repair.

What is the significance of laser welding head maintenance?

Generally speaking, when we use such equipment as a laser welding machine, the laser head that emits the laser is a very important part, because during this welding process, the energy used for welding comes from this laser head. Therefore, protecting the laser head is very important for the usability of the entire equipment.

Laser welding head maintenance?

The first is cleaning. It should clean regularly. Do not let some dirt affect the quality and effect of the welding.

Secondly, we need to regularly check the use of laser welding heads. Once laser heads has problems, they need to repair and fix in time to avoid affecting production.

Finally, in fact, the protection of laser welding heads must start from the usual time. If you usually do not pay much attention when using them, the life of the laser welding heads will naturally decrease.

的 Precautionary hazard measures after laser welding head maintenance?

1. Safety management. The laser welding machine safety management mainly includes setting up a special organization or personnel, clarifying responsibilities and rights: including safety training and supervision.

2. Personal protection. Mainly refers to wearing fire-resistant and heat-resistant laser protective clothing, wearing laser protective glasses that can selectively attenuate specific laser wavelengths, wearing laser protective masks for ultraviolet laser sources, and wearing to avoid damage caused by direct or scattered laser light Laser protective gloves.

3. Engineering control.

Engineering control refers to the safety measures taken on the structure of the laser or laser processing system, mainly including: protective cover-to prevent workers from receiving more than the maximum allowable exposure; safety chain-refers to Automatic device to avoid radiation when the protective cover removes; safety light path-to close the light path that may cause combustion or secondary radiation when irradiated; key switch-refers to the laser turning when the key is removed; To prevent the laser beam from exceeding the controlled processing area, a beam terminator or attenuator can be used.