What is the safe operation of a fiber laser cutting machine

Fiber laser cutting machine is widely famous in sheet metal processing,and many other industries.Then what is the safe operation of laser cutting.Notices must be trained by professionals to operate independently.

Based on our experience, The following details of the safe operation of the fiber laser cutting machine are summarized.

A. Firstly,Observe the safety rules of the cutting machine. Start the laser strictly according to the laser start up procedure.

B. Secondly,Need to train the operator to be familiar with the structure and performance of the equipment and master operating system knowledge.

C. Thirdly,Put on the glasses if operate near the fiber laser beam.

D. Before finding out if the material is suitable for fiber laser, do not process it in case that it may cause steam and smoke.

E. When start operating, the operator can not leave or hand over to others. If need to leave, the operator should turn off the machine.

F. Put the fire extinguisher nearby. Turn off the machine if not operate. Do not put paper, leather or other flammable material near the laser beam.

G. If find any abnormal situation when operating, stop the machine immediately and troubleshoot or inform engineers.

And more

H. Keep the laser, the frame and the surrounding area are clean, orderly and free of oil. Put the Workpiece, metal sheet and the scarp stacked as required.

I. When using gas, crush the welding wires should be avoided to avoid leakage accidents.The use of gas cylinders and transport should comply with the cylinder monitoring procedures. Do not expose the cylinder to sunlight or near heat sources. When opening the bottle valve, the operator must stand on the side of the bottle mouth.

J. Observe high pressure safety regulations when servicing. Every 40 hours of operation or weekly maintenance, every 1000 hours of operation, or every six months of maintenance, should be performed in accordance with regulations and procedures.

K. After turning on the machine, manually start the machine at low speed in X and Y direction to check if there is any abnormality.

L. After a new part program is entered, it should be tested and its operation checked.

M. When working, pay attention to observe the operation of the machine frame to avoid the machine getting out of the effective range or two machines collisions causing accidents.

XT laser has been in the market for 16 years. And we have the ability to provide you professional laser cutting machine.Any interest,contact us freely.