Reasons for beam jitter of fiber laser cutting machine

Now all walks of life can use laser processing technology, fiber laser cutting machine is more and more widely used. However, when many users use the fiber laser cutting machine, due to their unfamiliarity with the equipment or improper operation, a series of problems such as wrong reset direction and beam jitter will occur. Here is an analysis of the reasons for the jitter of the beam when the fiber laser cutting machine is turned on.
How to use metal laser cutting machine

1. Close the switch in the power distribution cabinet;
2. Open the power lock on the operation panel of the metal laser cutting machine, press the power button to supply power to the CNC, turn on the power of the dust collector, and check whether the indicator light on the control box panel is normal;
3. The CNC stops internal self-diagnosis and confirms that the laser cutting machine_metal laser cutting machine does not show any error messages;
4. Close the switch in the servo cabinet, press the servo on button on the operation panel to supply power to the servo system, turn the pulse knob on the control cabinet panel to the on position, stop the recoil of the filter element, and check whether the pulse is normal;
5. Test operation, confirm that the switches and buttons on the panel are sensitive, and firmly check whether the ash unloading flapper valve is normal;
6. Test run the machine to confirm that the laser cutting machine_metal laser cutting machine runs smoothly, and the limit and emergency buttons are firm;
7. The powder spraying and marking are carried out in the cutting line, pay attention to the explosive zinc powder, pay attention to prevent flying, and wear a mask when operating.

XT laser is manufacturer of laser machines since 2004, any inquiry, feel free to contact us:

Email: xintian131@xtlaser.com

Skype: XTlaser-Flora

Mobile/Whatsapp/Wechat:0086 13153030563

Web: www.xtlaser.com

Youtube Homepage:https://www.youtube.com/feed/my_videos