The factors that affect the marking speed of the fiber laser marking machine

When purchasing a laser marking machine, enterprises value the marking speed of the equipment. Because this directly affects the processing efficiency of the order. So, what are the factors that affect the marking speed of the fiber laser marking machine?

Generally speaking, the main reasons affecting the speed of the fiber laser marking machine :

one is the equipment itself, and the other is the processing workpiece. The main reasons of the equipment are the laser frequency, laser spot mode and light speed divergence angle laser power, reasonable optical matching processing. And the other reason is the marking density, marking range, marking depth and laser spot size during processing.

1. Marking density:

Under the same format, same spot, and same depth, the higher the marking density, the slower the corresponding marking speed, because the high density directly increases the marking area.

2. Marking range:

large range The marking speed is slower than the marking speed in a small area, because the deflection area of ​​a large scope marking galvanometer will naturally have a certain effect on the marking speed. Need to deepen the marking depth, need to adjust the parameters of the fiber laser marking machine, increase the power and current parameters of the fiber laser marking machine, these will affect the marking speed.

3. Laser spot size:

The density of marking characters will also affect the speed. In the case of the same marking area, the same light spot and the same marking depth, the higher the marking density, the slower the marking speed After all, the density of characters to be marked is large, which is equivalent to directly increasing the area to be marked.

The above factors will affect the marking speed of the laser marking machine in the actual operation of the marking process. Follow these conditions to increase the speed of marking and create higher benefits.