Fiber laser cutting machine water chiller Points for attention in winter—Amy
Fiber laser cutting machine water chiller Points for attention in winter
In many countries,winter is coming. As we all know,water chiller is one of the most important parts of fiber laser cutting machine.
The temperature of the laser source and water chiller is too low, may lead to water chiller water pipe icing. Since ice is less dense than water, so it will lead to water chiller and laser source internal volume expansion caused by rupture or deformation of cooling water pipes, causing significant damage to the relevant core components.
Fiber laser cutting machine water chiller Points for attention in winter.
Make sure machine is working.
We should try to ensure that the ambient temperature can not be lower than 5 degrees Celsius, to meet the normal use conditions of the laser cutting machine. So as to avoid the failure or affect the stability of the fiber laser source performance.
Avoid fiber laser cutting machine fiber laser source and water chiller freezing in low temperature environment.
- The recommended method for freezing prevention is to keep the water chiller and fiber laser source in temperatures above 0 degrees celsius.
- If the above conditions can not be satisfied,please keep the fiber laser source and water chiller kept on working state. If the water in the pipe is always flowing, it can prevent freezing. Of course, in this case, if the water chiller for long downtime or power outages, there is also a certain risk of icing.
- If the above two points can not be done, the water in the water tank of the fiber laser source and the water chiller in the pipeline can be emptied as far as possible, operation can be performed according to the instructions below.
Amy
Skype: amyzhengzx@gmail.com
Email: xintian116@xtlaser.com
Whatsapp/wechat: 0086 15064070419
