Correct operation for fiber laser cutting machine:Charry

Correct operation for fiber laser cutting machine

Correct operation for fiber laser cutting machine.

Fiber laser cutting machine is a high-tech large-scale machine in the division of machinery.

This kind of machinery is very expensive and the demand of technicians’ operation level is also very high.

In the cutting process, this machine must be always maintained in order to extend the lifespan.

Today we will talk about the use and maintenance skills of this machine.

First, let the steel strip stay tight at all times.

The steel belt plays a very important role in the transmission of the laser cutting machine.

The steel strip is made of steel,if the steel is not tightened during use, it will easily being cut.

Out of the track, even the steel strip may cause slipping, which poses a great threat to the safety of the workers,

so no matter when or where, the steel belt must be kept in tension.

Second, often check the angle of the tool

Because the most important part of the whole fiber laser cutting machine is the cutting head.

If the angle of the cutting head shows a certain deviation,

the final precision of the cut object will be less accurate during the cutting process.

Third, often sweep dust inside of the machine.

Since the laser cutting machine directly vaporizes the metal surface during cutting,

a lot of dust is often generated on the surface and inside of the cutting machine.

We should always suck the dust out with a vacuum cleaner to ensure zero inside the machine.

The parts are spotless, so that can operate normally.

Fourth, parts and components should be treated frequently with lubricating oil.

We need to lubricate the racks, rails and many cutting machine parts from time to time

so that they can ensure that the gears are very precise during operation.

In this way, the mechanical operation will be in the normal running track,

and the precision of the cut products will be higher.

In addition to the daily maintenance of the fiber laser cutting machine,

we must strictly check the parts when we buy the machine,

so that the mechanical damage can be eliminated from the root.

At the same time, if any parts are damaged during the use of the machine, it must be replaced in time,

which is a kind of protection for the machine, and the ideal cutting effect of the laser cutting machine.

Only after the above two points are achieved can the service life of the cutting machine be extended.

Any other questions please just contact us anytime:

Email;xintian111@xtlaser.com

whatsapp:+8618253165863

    見積もり依頼

    助けが必要?

    以下のフォームにご記入いただければ、1 時間以内にサポートがご利用いただけます。