Details of CO2 laser cutting and engraving machine.

Nowadays, more and more people majoring in wooden artware or other products making. With the technology developing so quickly, a lot of them choose CO2 laser cutting and engraving machine to finish their work.

In order to let you know more about CO2 laser cutting and engraving machine. Here share some details about with you.

What can the machine do?

CO2 laser cutting and engraving machine can cut and engrave wood, leather, pvc, acrylic, etc.

Is there any protection device for the machine?
Our machine has cover protection (when the front cover of the machine is opened, the laser will stop working), emergency stop switch (in an emergency, you can immediately press to cut off the power of the machine), cooling system protection (if the laser tube cooling system has a problem, the laser Will stop working), all doors on the machine can be locked with a key, which is more safe and secure

To amplify the power, can it be achieved by only using a high-power power supply or replacing a laser tube with a higher power?
No, it need to change the laser power supply and laser tube at the same time.

For example, a 60watt laser power supply can only support the work of a laser tube up to 60watts. If you only replace the 80watt laser power supply without replacing the corresponding laser tube, it will generate a certain current pressure on the 60w laser tube, which will affect the life of the laser tube. Make an impact. On the contrary, if you change to an 80watt laser tube without replacing the corresponding laser power supply, it may be impossible to drive the laser tube due to the low current. (In addition, if you replace a larger wattage laser power supply and laser tube, the chiller must be replaced with a larger model. It is also necessary to consider whether the laser tube box can fit a larger wattage laser tube.)

Any need please contact us at any time.

Oriole

Tel:13731273956