Jewelry making samples from customer

Jewelry making samples from customer

So if you also need to mark,engrave and cut jewelry,like gold,silver,brass.

Yes,our 50w fiber laser marking machine is the suitable solution.

All jewelry metals, precious and non-precious.From gold and silver to brass.For cutting out pendants, charms, keepsakes.

As a general rule for name jewelry designs, from 0 mm to 2mm ,is no problem.

So these three popular metals used in name jewelry designs:

• Gold cuts well, because it is a good conductor of thermal energy, but proper settings for the metal are required.
• Silver is tough to work with because it retains heat from the laser. And can start to flex and warp when you are working with it. To prevent this from happening, heat-sink the silver using a bracket or clamp fixture to transfer heat away from the affected area.
• When cutting such pieces, try the following tips:
  • When it comes to font choice, stick with those that have uniform widths across all letters—no super narrow areas.
  • When in doubt, select the bold feature on a font to enhance the strength of the letters and reduce the kerning.
  • To save the step of soldering on rings for attaching a necklace to a name pendant. And program the machine to cut an eyelet on each side of the piece . Engraved patterns and textures are also no problem.
  • Polishing and Cleaning.With a smooth surface ready for polishing.

  Collect cut-out sections of precious metal designs.To use one filter collect the dust in the cutting process.

  When you need machine,just contact us,we will help you.

• Email:xintian111@xtlaser.com
• Whatsapp:+8618253165863