Some information about handheld fiber laser welding machine

Handheld fiber laser welding machine is very popular recently.So today we will share you some information about handheld fiber laser welding machine.

About the operation

1. There is no need to installation for the handheld laser welding machine, our customers can use it directly after receiving the machine. It is very easy to operate, there is no installation and training cost. We have manual and operation video for our customers and aslo provide video call training, we can make sure that our customers can use this machine within 3 days for free.

 

2. Compared with the traditional welding, like tig, handheld fiber laser welding machine no need to use welding wire, only when the gap more than 0.5mm, we should use the wire feeder.

3.. The maintenance for this machine is very easy, when finish your welding work, turn off the power and clean the welding head, it can make the lifetime of protective lens and copper nozzle longer.

About the use-cost

1. The quickly-wear parts for the handheld fiber laser welding machine are only protective lens and copper nozzle.

And if you buy them from us, we can give you the cost price, USD10 for copper nozzle(lifetime is 360 hours) and USD8 for protective lens(lifetime is 240 hours).

2. Except the quick-wear parts, the machine also consume electricity and gas.

The power consumption of 1kw machine is 11kw to 12kw/hour at full power situation.

In fact, we usually just use 50%-60% power of 1000w to weld the metals, it is enough, so the power consumption is small.

The machine aslo need to connect with gas, argon or nitrogen.

The gas can isolate the air from the welding plate to prevent the reaction with the air.

So the welding surface of the metal plate will be white and beautiful. The gas also can protect the lens from welding dust.

The price of the gas is different in different counties and regions.

if our customers think the cost of the gas is too high, they can use air compressor to produce air gas.But the welding effect will not very good, the welding surface of the metal may be black, so our customers should wipe the surface of the metal with ethyl alcohol.

Any other questions,pls feel free to contact us.

Ariel Liu

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010

Skype:Ariel XTLaser