Improve fiber laser cutting machine cutting quality

After purchasing the fiber laser cutting equipment, the user wants to improve the cutting quality. However, the cost saving problem usually consider in the cutting process. And some even save the extreme, for example, the auxiliary gas is not pure. And cause the power to decay. Then improve fiber laser cutting machine cutting quality. www. xtlaser.com

Sometimes considering the profit, the thickness and output power of the fiber laser cutting machine can neglect. Today, we mainly explain some methods for improving the cutting quality of fiber laser cutting machines. And which expect to lead to the attention of users. Then improve fiber laser cutting machine cut quality.

1. Thickness of metal material (Improve fiber laser cutting machine cutting quality)

The output power of the fiber laser cutting machine is 500W and 1000W. And the power is more than 2000W. The fiber laser cutting machine below 1000W is suitable for cutting carbon steel below 14mm thickness and stainless steel below 6mm. The quality of these two types of products is very good at the corresponding material thickness. And the cutting speed is fast, which can ensure laser cutting. Then work efficiency and cost savings. Then improve fiber laser cutting machine cut quality.

2. Cutting speed (Improve fiber laser cutting machine cutting quality)

No matter whether the laser cutting speed is too fast or too slow, excellent cutting quality cannot be obtained. So it is not possible to speed up the cutting speed only considering the progressive work efficiency. Or to cut slowly in order to obtain better quality. Then improve fiber laser cutting machine cut quality.

3. Laser output power (Improve fiber laser cutting machine cutting quality)

The higher the output power of the fiber laser cutting machine, the higher the thickness of the material that can cut. And the better the quality of the corresponding cutting. Therefore, the user must clearly determine the thickness of the material in the previous purchase process. Types, etc., prevent the cutting quality from cuting or not obtaining. Then improve fiber laser cutting machine cut quality.

4. Material appearance roughness (Improve fiber laser cutting machine cutting quality)

We all know that the flexible processing method of fiber laser cutting is good, not subject to the shape of the workpiece, but it is limited by the roughness of the surface and can not reach the perfect cutting effect.

5. The focus of laser cutting (Improve fiber laser cutting machine cutting quality)

As long as the focus of the focus is accurate, the cutting can be achieved, and the best quality product can be cut.

https://www.youtube.com/channel/UC9ZYHh4cTjAZgkWFXQDVwFA