The introduction of fiber laser cutting machine

1.Brief introduction of the fiber laser cutter machine

As we know,XT  fiber laser cutter machine produced by XTLASER. It adopts gantry-motion structure, linear guide and screw drive, AC servo motor and drives, and exchange working table , which could  keep high performance , good cutting quality. Besides, it is equipped with a world leading IPG-1000W/2000W fiber laser source.

Therefore,  the fiber laser cutter machine is not only highly recommend for carbon steel cutting, but also excellent for SS plate, aluminum alloy plate, copper plate cutting and etc.

2.Industry application

Fiber laser cutter is mainly used in sheet metal processing, aviation, aerospace, electronics, appliances, subway parts, automobile, food processing machinery, textile machinery, engineering machinery, precision parts, ships, metallurgical equipment, elevators, gifts, tools processing, decoration, advertising metal processing and other manufacturing  as well as processing industries.

 

3.The advantages of fiber laser cutting machine:

1) Excellent beam quality: smaller focused spot, more sophisticated cutting lines, higher work efficiency, better processing quality;

2) Higher cutting speed: It is 2 times than the same power CO2 laser cutting machine;

3) Higher stability: Adopt world’s top level IPG fiber laser generator, stable performance, the main parts lifetime is up to100,000 hours;

4) Higher electro-optical conversion efficiency: The efficiency of fiber laser cutting machine is three times than CO2 laser cutting machine, saving energy and environmental protection;

5) Low cost of electricity: The whole fiber cutting machine power consumption is just 20-30% of same power CO2 laser cutter;

6) Free-maintenance: It doesn’t need laser working gas, fiber transmission, without reflection lenses; it can save a lot of maintenance costs;

7) Easy operation: fiber transmission, no need to adjust the optical path;

8) Super flexible guide light: small size, compact structure, and it’s easy to satisfy flexible processing requirements.

4.Technical parameters:

Laser type	Fiber laser
Laser brand	IPG/SPI/Raycus
Laser power	300W/500W
Working area	1500X3000mm/2000X4000mm/2000X6000mm
Working table	Sliding saw blade working table
Control system	CYPCUT
Drive mode	Dual-drive rack and pinion transmission
Idle/Processing Speed	100m/min / 30m/min
Précision de positionnement	0.04mm
Laser Head	Laser Mech / FS cut /Preste
Power Supply	AC380V ± 5% 50 / 60Hz
Total Power	6KW~20KW
Cooling System	Water cooling
Supported Format	PLT, DXF, BMP, AI, DST, DWG, etc.

Pls contact me:

wechat:15965618161

mobile/whatsup:+8613335191585

skype:Angelinaxtlaser@outlook.com

email:xintian118@xtlaser.com