Fiber laser cutting machine maintenance:Charry
Fiber laser cutting machine maintenance
Fiber laser cutting machine maintenance.
After you get the machine,there also need many steps you need to do.
About the machine installation and training,before the engineers come to your factory,you need to prepare:
1.Nitrogen.
Cause you need to cut 1mm to 6mm stainless steel,it need Nitrogen.
At least 2 bottles of Nitrogen.
2.Alcohol.
Purity is 99.99%,if we need change the lens of laser head,we need to use it.
And in your future using,you also need it to clean the lens.
3.The suitable industrial voltage,you should have it already.
4.Prepare the lubricating oil.
You know we have the lubricating oil system, to make sure the guide rail,rack and pinion ,etc.
5.If possible,prepare some tools,like Wrench, pliers, electric drill,need install the machine.
6.Do not damage the package,when engineers arrived at your factory,you open the package together.
When the machine is coming to your factory,let me know when you have time for installation and training,i need time to apply the visa for engineer.
| Clean the surface of the equipment to attach dust and cut slag |
| Check the joints of the capacitor signal module (at the cutting head) to confirm that the fastening is intact and there is no looseness. |
| Clean up the water in the A/C storage tank |
| Equipment homing (including X, Y and Z axes) |
| Cleaning waste scraps and debris in waste trailers |
| Check the lubricating oil level in the lubricating oil pump. If it is not enough, fill it in time. |
More details you want to know,contact us.
Email:xintian111@xtlaser.com
Whatsapp:+8618253165863
