How to improve quality of your fiber laser cutting machine?-Teresa

How to improve quality of your fiber laser cutting machine?

Metal laser cutting machine, as we all know, the most important advantage of it is that it can greatly improve the cutting accuracy. However, many customers have such problems during the actual use process. That is, only pay attention to the cutting speed, which will lead to the product quality can’t be effectively controlled. So how to ensure the quality of laser cutting? Let XTLASER tell you.

1.Preparation before cutting

In order to improve the cutting quality, it is necessary to carry out scientific and reasonable cutting design, review and repair the drawings before cutting.

2.During cutting

During the cutting process, in addition to adjusting the relevant parameters of the machine according to the material thickness, your operator should pay attention to the cutting quality of the sample. The batch cutting shall be carried out only after the sample printing quality is qualified enough.

3.Correct adjustment of focus position

Adjust the position of focus according to the material and thickness of the cut. Usually thin carbon steel below 5mm, with zero focal length and focus on the surface of the workpiece, aluminum, stainless steel and other workpiece focus on the surface of the workpiece, when cutting thick carbon steel plate, the focus is on the surface of the workpiece.

4.Adjust assist gas pressure data

When cutting at a faster speed, the stability of gas pressure has a great influence on the cutting burr. According to the data parameters,  the best gas pressure can be adjusted to ensure the quality after cutting.

In fact, no matter how high-tech the machine is, it can’t work it self without operator. So it is necessary to remind the operator or engineer of customers to learn how to use the machine from XTLASER. Or if customers have any problems with machines, please feel free to contact XTLASER.

Email:xintian105@xtlaser.com

Whatsapp/Mobile: +8615006829603

Skype: xtlaser Teresa

Facebook: https://www.facebook.com/teresa.ren.754

    DEMANDER UN DEVIS

    Besoin d'aide ?

    Remplissez le formulaire ci-dessous et l'assistance sera disponible dans l'heure qui suit !