Tips to get a perfect cutting effect-Teresa

Tips to get a perfect cutting effect

How to get a perfect cutting effect

In the conventional low-peak perforation process, the molten material remains more on the surface of the workpiece due to the slower piercing speed, resulting in inconsistent apertures and imperfectness.
High peak power perforation is faster, resulting in a narrower and deeper weld pool, so the pore size is smaller and the splash is smaller. The perforated surface is clean and consistent. Suitable for fine processing.

Firstly, Perforation

The peak power is high, the heat affecting zone is small, and the splash is slight;
Significantly reduce the pollution of the protective window;
The follow-up control is simple and the process stability is high;
Conducive to small hole cutting;
Quickly enter the cutting without additional action, saving processing time;
It is easy to cut, which is conducive to achieving stable and high quality cutting results.

Secondly, Highly reflective materials.

The peak power is high, the material absorbs more laser light, the process debugging is simpler, and the high anti-alarm is less likely to occur in cutting and perforating.

Thirdly, Complex contours.

High peak power results in a better cutting profile, especially for fine contours.

If you want to know more knowledge of fiber laser cutting machine,contact us.

Whatsapp:+8615006829603

Email:xintian105@xtlaser.com

Skype: xtlaser Teresa

    DEMANDER UN DEVIS

    Besoin d'aide ?

    Remplissez le formulaire ci-dessous et l'assistance sera disponible dans l'heure qui suit !