Fiber laser marking machine marking and engraving on metal-Tulsa

The Laser Marking Process

Laser marking is what happens when the beam interacts with the surface of a material, slightly altering its properties or appearance.

It is achieved by moving a low-powered beam slowly across the material using a method called discoloration, which creates high-contrast marks without disrupting the material.

Laser heats the material, causing oxidation under the surface and turning the material black.

It applies low temperatures to metal to anneal the surface.

All of this is done while leaving the surface intact. Fiber laser marking machine marking engraving metal

Laser marking differs from laser engraving and laser etching in a number of ways:

It is less common and not all places offer these services. Fiber laser marking machine marking engraving metal

It is also referred to as laser coloration or laser dark marking, as well as charring for plastic materials and annealing for metals.

There are four common types of laser marking: annealing, carbon migration, foaming and coloration.

It’s popular in the medical device industry for stainless steel and titanium parts, also very popular on other materials as well.

A laser marker is ideal for bar codes, UID codes, QR codes, logos and other identification needs.

The Laser Engraving Process

Laser engraving is a process where the laser beam physically removes the surface of the material to expose a cavity that reveals an image at eye level.

The laser creates high heat during the engraving process, which essentially causes the material to vaporize.

It’s a quick process, as the material is vaporized with each pulse.

This creates a cavity in the surface that is noticeable to the eye and touch.

To form deeper marks with the laser engraver, repeat with several passes.

Although engraving is a subsection of laser marking, it still differs in many ways:

There are three types of laser engraving: etching, deep laser engraving and laser ablation (the difference between the three is what the surface is and how much you remove).

This is the most common option for people who want something personalized or customized.

Not ideal for marking safety critical parts. Fiber laser marking machine marking engraving metal

Maximum engraving depth is 0.020″ in metals but can go as deep as 0.125″ in materials such as graphite.

This is the fastest way to mark with a laser. Fiber laser marking machine marking engraving metal

You can engrave on almost any kind of metal, plastic, wood, leather and glass surface.

Another important comparison to make is how laser engraving compares to traditional engraving:

We can do laser engraving on a number of materials.

Laser engraving is more legible than traditional engraving for small objects such as jewelry.

It provides you with more font options.

There is a smaller chance of product damage or deformation.

Laser engraving machines are faster than traditional methods.

The Laser Etching Process

Laser etching, which is a subset of laser engraving, occurs when the heat from the beam causes the surface of the material to melt.

The laser beam uses high heat to melt the surface of the material.

The melted material expands and causes a raised mark.

Unlike with engraving, the depth in etching is typically no more than 0.001”.

The differences between laser etching, marking and engraving include:

Since a laser etcher changes the surface finish of metals, it alters its reflectivity and enhances contrast.

It removes 0.001″ or less of the material.

We can do laser etching on bare, anodized or plated metal surfaces, as well as polymers and ceramics.

Tulsa Zhang