Daily Maintenance Of Optical Fiber Laser Marking Machine-lisa

We need to select different laser marking machines according to the working conditions, marking materials and format. As the most advanced laser marking equipment in the world, the fiber laser marking machine has a wide application range and is recognize as a new generation of solid laser replacement. It has good beam quality, fast marking speed, small size and convenient use. And the working life is long, and it has been favor in the marking industry. To achieve the normal use of fiber laser marking machine and long life, daily cleaning, maintenance and maintenance is essential.

1. In fact, it is relatively easy to maintain fo Fiber laser marking engraving machine, It is necessary to clean its fan, especially after long-term use. The laser marking equipment is clean inside and outside, and there is no oil on each sliding surface and screw. All parts are not leaking or leaking. Clean the filter regularly and wipe the lens. The mechanical engineers of the chips, debris and should clean dirt around the laser marking equipment; the tools, accessories and workpieces (products) should be placed neatly, and the pipelines and lines should be organized; in case of

2. Regularly check whether the screws of the instrument are fixed firmly. Should be clean the lens frequently, or clean it every day. However, when wiping the lens, it must be wiped with a special wiping cloth, which can not damage the lens.

3, in the process of use should be strictly in accordance with the operating procedures to avoid damage to the fiber laser marking machine

4. The appearance of the laser marking equipment is clean. Before and after each use, the necessary wiping, to ensure that the equipment is dust-free, clean is the key, and the equipment environment is also clean, in addition

5, laser light path system maintenance, usually the internal light path of the machine is closed design, no need to clean. But if there is a need for cleaning, it is best to find a professional. When wiping the lens, gently wipe it with lens paper with a little alcohol to avoid damage to the optics.

6, air cooling system maintenance. Air-fiber laser marking machines use air-cooled cooling, so air-cooled equipment is particularly important. Check the fan regularly and repair or replace it in case of any abnormal response.

7. If there is any fault in the fiber laser marking machine, should cut off the power mmediately, too

8. If the surface of the focusing mirror is contaminated, should remove the focusing mirror  to clean the lower surface.

9. During the working process of the fiber laser marking machine, the marking machine must not be move to avoid damage to the machine.

10.  Be careful not to damage or fall. Also, do not touch the focusing mirror with your hand or other objects.

11. Do not cover the stack or put other items on the fiber laser marking machine to avoid affecting the heat dissipation effect of the machine.

12. When using the equipment for a long time, the dust in the air will be adsorb on the lower end surface of the focusing mirror. The lighter will reduce the power of the laser and affect the marking effect; if the lighter causes the optical lens to absorb heat and overheat, it will burst. When the marking effect is not good, carefully check the surface of the focusing mirror for contamination.

13. The cleaning method is to mix anhydrous ethanol (analytical grade) and diethyl ether (analytical grade) in a ratio of 3:1, infiltrate the mixture with a long fiber cotton swab or lens paper, and gently scrub the lower end surface of the focusing mirror. On one side, you must replace the cotton swab or lens paper.

14. When the fiber laser marking machine is not working, the marking machine and computer power should cut off. Cover the field lens lens to prevent dust from contaminating the optical lens.

15. When the fiber laser marking machine is working, the circuit is in a high pressure state. Non-professionals should not be inspect during startup to avoid electric shock. besides

16. Note that the output of the laser power supply cannot be suspend to prevent ignition and breakdown between other electrical appliances.

17. No sound and light power supply is allow to work at no load; as well as

18. Don’t allow to start other components before the xenon lamp is ignited to prevent high voltage from entering the damaged component.

19. Forbid to arbitrarily change the main components of the protection circuit and the fiber laser marking machine;