2. Operators must be trained.

Be familiar with equipment structure, performance, and knowledge of fiber laser cutter machine operating system.

3. Wear protection articles and laser protective glasses in accordance with the regulations.

4. Do not process a material until it is clear whether it can be irradiated or heated by a laser to avoid the potential danger of smoke or steam.

5. Operators are not allowed to leave while the equipment is running and should stop if they have to leave.

6. Put the fire extinguisher within your reach. Then Turn off the laser source or turn off the machine when the machine is not working. Also do not place paper, cloth or other flammable material in the vicinity of the laser beam.

7. Turn off the machine in time when founding an anomaly in the process of processing,

8. Keep the machine surrounding site tidy and orderly. Such as stack the workpiece, plate and waste in accordance with the regulations.

9. Observe the standard process when maintenance machine. Carry out machine maintenance every 40 hours or every week, and every 1000 hours or every six months, in accordance with regulations and procedures.

10. Before the first time use, you should manually check X, Y direction in low speed to confirm if there is an abnormal situation.

11. After download the new artifact program into machine, you should run it without cutting first and check if it’s normal to use.

12. When working, pay attention to observe the machine work. So we can avoid the accident caused by the cutting machine out of the prescribed travel range.

Pay attention to the operation and maintenance of fiber laser cutting machine. In this way we can increase the service life of the equipment. Also save the cost and increase the benefit.