Fiber laser cutting machine life time:Charry

Fiber laser cutting machine life time

Fiber laser cutting machine life time.

How to extend the fiber laser cutting machine life

As a manufacturer of laser equipment for many years, in addition to selling our machines,we pay more attention to the improvement of our machine quality and perfect after-sales service.From the perspective of users to think about problems and create greater value for users.

Firstly. The laser cutting machine person must start the laser with correct procedure.

Secondly. The operator must train to be familiar with the structure and performance of the equipment and master the knowledge of the operating system.

Thirdly. Wear labor protection articles.And wear protective glasses that meet the requirements in the vicinity of the laser beam.

Fourthly. Do not process a material before it can irradiate or heat with a laser to avoid the potential hazard of smoke and vapor.

Fifthly. The operator shall not leave the post or the person to be in charge when the equipment start. If it is necessary to leave,stop or cut off the power switch.

To know more about the machine using.

6. The equipment should be kept away from electrical equipment that is sensitive to electromagnetic interference and may cause electromagnetic interference.

7. Keep the fire extinguisher at your fingertips; turn off the laser or shutter when not working; do not place any irrelevant total reflection or diffuse objects in the device to prevent the laser from being reflected to the human body or flammable materials. on.

8. Never open any end caps while the equipment is in operation.

9. During the working process of the equipment, the operator must observe the working condition of the equipment at any time. If abnormal conditions occur, the power supply should be cut off immediately, and the fault should be promptly reported or reported to the supervisor. And actively take corresponding measures.

10. Observe the high pressure safety regulations during maintenance. Every 40 hours of operation or weekly maintenance, every 1000 hours of operation or every six months of maintenance, in accordance with the regulations and procedures.

So if you do not know how to choose a suitable machine.Or you need to know more about cutting machine.

Contacts us.

Whatsapp:+8618253165863

    Get a Quote

    Need Help?

    Fill out the form below and support will be available within the hour!