Laser Cutting Machine Technology How To Deal With Burrs?

Fiber Laser cutting machine processing sheet metal burr what is the reason?Here we give you a simple analysis.

The working principle of fiber laser cutting machine, analysis of the resulting burr causes and solutions.

First, the focus of the beam position deviation.–fiber-laser-cutting-machine

Solution:adjust the focus position, according to its offset position to adjust

 

Second, the output power of the machine is not enough.–fiber-laser-cutting-machine

Check whether the fiber laser cutting machine works properly. If not normal, it needs to repaire and maintain machine in time. If normal, check whether the output value is correct or not.

 

Three, the cutting speed of the fiber laser cutting machine is too slow–fiber-laser-cutting-machine

Solution: timely adjust and improve the speed of wire cutting

 

Four, the purity of the auxiliary gas of the fiber laser cutting machine is not enough.–fiber-laser-cutting-machine

Solution: improve the purity of the auxiliary gas

 

Five, the cutting point of the laser beam of the cutting machine has shifted.–fiber-laser-cutting-machine

Solution: focus debugging, timely adjustment

 

Six, laser cutting machine operation time is too long to produce instability–fiber-laser-cutting-machine

Solution: close the machine, restart and let the machine rest

 

The main reason of burr in laser cutting machine.when the laser cutting machine is working the workpiece, the laser beam irradiates the high energy produced on the workpiece surface,

so that the workpiece surface vaporization rapidly, and evaporation, to achieve the purpose of cutting. But there is a core device, we must attach importance to auxiliary gas.

The auxiliary gas is when the workpiece surface irradiation after gasification, blew the slag on the surface of workpiece,If the auxiliary gas is not used, the slag will be cooled and the burr will be formed on the cutting surface.

This is the main reason for burr formation

Another reason is the quality of the equipment itself, as well as the parameter setting factors, all customers after the purchase of laser cutting machine, must be professional operators debugging equipment.

So it’s important to choose a quality factory with good after-sale service .

Solution to burrs in sheet metal processing by laser cutting machine;

1.must be equipped with air compressor, the use of auxiliary gas to cut.

2.Find a professional operator debug laser cutting machine parameters until normal.