Maintain the metal laser cutting machine

Maintain the metal laser cutting machine.

Firstly,Always check the steel strip and make sure it is tight. Otherwise, if there is a problem in the operation, it may hurt people and seriously lead to death. The steel strip looks like a small thing, and the problem is still a bit serious.

Secondly,Check the straightness of the track and the verticality of the machine every six months, and find that the maintenance and debugging are not normal. If you don’t do this, it is possible that the effect of cutting out is not so good, the error will increase, and the cutting quality will be affected. This is a top priority and must be done.

Thirdly,Use a vacuum cleaner to suck dust and dirt from the machine once a week. All electrical cabinets should be kept clean and dustproof.

Fourthly,Each guide rail should be cleaned frequently to eliminate dust and other debris, to ensure that the normal rack of the equipment should be wiped regularly, and lubricated to ensure lubrication without debris. The guide rails should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently. The machine can move better during the journey, and the quality of the cut products will be improved.

أخيرًا ، رأس القطع بالليزر ذو البعد البؤري المزدوج هو عنصر هش في آلة القطع بالليزر ، مما يتسبب في تلف رأس القطع بالليزر بسبب الاستخدام طويل الأمد.

الأساسية ماكينات القطع بالليزر require regular inspection and maintenance.

If there is any deformation or other forms, you should know that the laser cutting head is a little damaged and needs to be replaced. Failure to replace will affect the quality of the cut and increase the cost. Some products may have to be processed twice to reduce production efficiency. The laser cutting head is to be found by Huagong Falilai. When purchasing the goods, it should be carefully checked to avoid problems when it is used.

If you want to know more about cutting machine,اتصل بنا.

ال WhatsApp: +8618253165863