Handheld laser welding machine,fiber laser welding machine-Jill

Handheld laser welding machine,fiber laser welding machine-Jill

Now handheld fiber laser welding machine is more and more popular,it will replace YAG laser welding mchine in the future.

Compared to YAG,For fiber laser machine:

①Firstly,Free maintenence.Spare part is only protective lens.

②Secondly,Long lifetime.Fiber laser source lifetime is 100,000 hours.

③Thirdly,Continus welding,welding effect is much better.

④Fourthly,can add auto wire feeder.

 

1.Firstly,Picture.

laser welding machine

 

 

 

 

 

 

 

 

2.Secondly,Welding ability.

now the most popular is 1kw and 1.5kw.

1.5kw is the maximum watt.

Penetration welding ability:

1kw can weld up to 3mm steel,2mm galvanized,1mm aluminum and brass.

1.5kw can weld up to 4mm steel,3mm galvanized,2mm aluminum and brass.

 

3.Thirdly,Welding videos

https://youtu.be/P1t8BEoUXF0

https://youtu.be/2Yy3vZt8y2Q

https://youtu.be/rkdqOr2FPRU

 

4.Fourthly,Auto Wire feeder.

For auto wire feeder,you can check this video.
https://youtu.be/appkDxaXXsA
https://youtu.be/P1t8BEoUXF0

 

5.Fifthly,What is a wobble head and what is the purpose of it?

wobble head welding effect is much better than usual head,now almost 90% customers will choose wobble head.

wobble head Advantages:

A.for some Welding process,usual welding head can not achieve.

but for this head,it can use about 70% power to achieve.Thus can save the cost.
B.Through the inside wobble motor,it can achieve the wobble welding.
For the sheet with Large impurity,this can reduce bubble,Fried point,Splash, etc.
C.In the case of irregular gaps,it can reduce the requirements for the fixture.
For usual head,there is no motor inside,so the head can not wobble welding,
the welding gap is 0.2mm,if over 0.2mm width,Light goes directly through it.
So the welding effect is not good.the welding craft is restricted.
Wobble head welding gap can achieve 0.5mm.

6.And also,consumables.

Consumables are protective lens and nozzle.
Protective lens need to change it about per 4-7 days.

More questions just let us know.
Jill from XT LASER
E: xintian101@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Firstly.

Secondly.

Thirdly.

Firstly.

Secondly.

Firstly.

Secondly.

    Get a Quote

    Need Help?

    Fill out the form below and support will be available within the hour!