1kw handheld welding machine,wobble welding head-Jill

Brief Introduction

The core of the fiber laser welding machine is a fiber laser generator.

The fiber laser generator is high energy-low cost laser generator with the character of High electro-optic conversion rate and long lifespan.

Fiber laser welding machine have the ability to use different configuration based on customer’s requirement.

Due to its excellent beam quality, extremely high laser power,The machine helps customers get the best welding results and high Productivity.

Principle of laser generator

A fiber laser or fibre laser is a laser in which the active gain medium is an optical fiber doped with rare-earth elements such as erbium, ytterbium, neodymium, dysprosium, praseodymium, thulium and holmium. They are related to doped fiber amplifiers, which provide light amplification without lasing. Fiber nonlinearities, such as stimulated Raman scattering or four-wave mixing can also provide gain and thus serve as gain media for a fiber laser.

Advantages.

(1) Firstly,miniaturization, precision, and high integration;
(2) Secondly,Free adjustment, maintenance-free, high stability;
(3) Thirdly,Competent for harsh working environment, with high tolerance to dust, shock, shock, humidity and temperature;
(4) Fourthly,High electro-optic efficiency: the integrated electro-optic efficiency is up to 20%, which greatly saves power consumption during work and saves operating costs;
(5) And also,high power;
(6) Excellent beam quality.

Standard Laser Head:Swinging motor inside the welding head

Advantages:
1.Firstly,for some Welding process,usual welding head can not achieve.but for this wobble welding head,it can use about 70% power to achieve.Thus can save the cost.
2.Secondly,through the motor,it can achieve the wobble welding.For the sheet with Large impurity,this can reduce bubble,Fried point,Splash, etc.
3.Thirdly,In the case of irregular gaps,it can reduce the requirements for the fixture.
For usual head,there is no motor inside,so the head can not swing,the welding gap is 0.2mm,if over 0.2mm width,Light goes directly through it.
So the welding effect  not good.the welding craft is few.
Swinging head welding gap can achieve 0.5mm.

More questions just let us know.
Jill from XT LASER
E: xintian101@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01